初代iPhone电池更换

Engels

Chinees

Stap 7 vertalen

Stap 7

Attach the red lead first, followed by the white lead, and finish with the black lead.
Place the wire from the new battery onto the new solder bead.
Press the tip of the soldering iron onto the solder bead until it melts.
Slide the wire lead into the liquid solder until it is in the center of the bead, then remove the soldering iron.
Continue with the other two connections the same way, taking special care not to solder two of the connectors together.

先焊接红色导线，再焊接白色导线，最后焊接黑色导线。
将新电池的电线放在新的焊点上。
将烙铁尖端压到焊点及电线上，直至其融化。
将电线滑入融化的液态焊锡中，直至其位于焊点的中心，然后移走烙铁。
以同样的方式连接剩下的两根电线，特别注意不要让锡球连接主板上相邻的的连接器。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.