Ga door naar hoofdinhoud

iPhone 1st Generation Battery Replacement

Engels
Nederlands

Stap 7 vertalen

Stap 7
iPhone 1st Generation Battery Replacement: stap 0, afbeelding 1 van 1
  • Attach the red lead first, followed by the white lead, and finish with the black lead.

  • Place the wire from the new battery onto the new solder bead.

  • Press the tip of the soldering iron onto the solder bead until it melts.

  • Slide the wire lead into the liquid solder until it is in the center of the bead, then remove the soldering iron.

  • Continue with the other two connections the same way, taking special care not to solder two of the connectors together.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.