Repareer je spullen Gemeenschap Winkel

初代iPhone电池更换

Terug naar de handleiding
Engels
Chinees
Stap 5
iPhone 1st Generation Battery Replacement: stap 0, afbeelding 1 van 1

  • We recommend that you clean the exposed surface of the board with a soft cloth or sponge and a small amount of rubbing alcohol.

  • Melt a small solder bead directly onto the metal connector on the board by placing the soldering iron onto the metal connector and then pressing solder against the tip and the board.

  • Once a small amount of solder has melted onto the board, lift the solder away first and then the soldering iron.

我们建议您用软布或海绵和少量擦酒精清洁电路板的表面和焊点。

将烙铁放在主板的连接器上，然后将焊锡条压在烙铁尖头和电路板上，将小焊珠直接熔到电路板上的连接器上。

如足够少量焊料已熔到电路板上，先将焊料提起，再移走烙铁。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.