Ga door naar hoofdinhoud

iPhone 1st Generation Communications Board Replacement

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Engels
Nederlands
Stap 12
iPhone 1st Generation Communications Board Replacement: stap 0, afbeelding 1 van 1
  • There are two stacked circuit boards on the iPhone. The communcations board is on the top, and the logic board is located on the bottom.

  • To separate the boards, insert a spudger into the gap in the metal shielding as shown. Carefully pry with the spudger to loosen the connector.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.