Repareer je spullen

Recht op reparatie

Winkel

Terug naar de handleiding
Engels
Duits
Stap 15
Remember back when you could unscrew the image sensor board from the back of the lens assembly? iFixit remembers. Alas, those days are long gone. A ring of glue is the only thing that adheres the lens to the image sensor in the Session. The 8 MP sensor in the Session drops the 4K capability found in the Hero4 Black/Silver 12 MP sensors, instead supporting resolutions up to 1440p at 30 fps.

  • Remember back when you could unscrew the image sensor board from the back of the lens assembly? iFixit remembers.

  • Alas, those days are long gone. A ring of glue is the only thing that adheres the lens to the image sensor in the Session.

  • The 8 MP sensor in the Session drops the 4K capability found in the Hero4 Black/Silver 12 MP sensors, instead supporting resolutions up to 1440p at 30 fps.

  • After some quick measurements, we found the image sensor in the Session to be roughly 4.5 mm x 3.4 mm, which would mean a 1/3.2" sensor format (which appears to be the same format found in the cheaper GoPro Hero).

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.