Ga door naar hoofdinhoud

Sostituzione della cover dell'antenna per iPhone di prima generazione

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 9 handleidingen die deze stap bevatten.

Stap 3
iPhone 1st Generation Antenna Cover Replacement: stap 0, afbeelding 1 van 1
  • Insert an iPod opening tool in the gap between the antenna cover and the front bezel. The wedge of the tool should be pointing towards the antenna cover. Slide the tool around the corner and up until you reach the metal backing.

  • Repeat the same procedure on the other side of the dock connector.

Inserisci uno strumento di apertura per iPod nello spazio tra il coperchio dell'antenna e il frontalino. Il cuneo dello strumento dovrebbe puntare verso la cover dell'antenna. Fai scorrere lo strumento attorno all'angolo e verso l'alto fino a raggiungere il supporto metallico.

Ripeti la stessa procedura sull'altro lato del connettore dock.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.