Removing Top Palm rest from bottom assembly. Part 1 of 2.

Follow steps #2-#15 to remove all components.

Turn the notebook on it's back. Remove 10 screws+1 extra long screw using a #0 Philips Screwdriver.

One screw on the right side, near where the Optical disc bay is may not come out that is okay.

Turn notebook over on so it rests with the palm assembly upwards.

Remove one screw, and disconnect all cables. Keep in mind when you remove the palm rest assembly there will be a hidden cable as mentioned in the picture.

Remove 1 screw labled "2 >" using a #0 Philips Screwdriver.