Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 7
There is a rubber pad covering the bottom attached by an adhesive. To get into the base station, you have to peel the pad off.
  • There is a rubber pad covering the bottom attached by an adhesive. To get into the base station, you have to peel the pad off.

  • There are five Phillips #0 screws underneath the pad you need to remove.

  • The numbers on the bottom are: FCC ID BCGA1143, IC: 579C-A1143, Model Number A1143.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.