Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 12
Removing the battery before lifting out the logic board is not strictly required, but makes removing the logic board easier and safer. If you leave your battery in, be especially careful not to bend the logic board against the battery's case near its bar code. Remove the following Tri-point screws securing the battery to the upper case:
  • Removing the battery before lifting out the logic board is not strictly required, but makes removing the logic board easier and safer. If you leave your battery in, be especially careful not to bend the logic board against the battery's case near its bar code.

  • Remove the following Tri-point screws securing the battery to the upper case:

  • One 5.5 mm Tri-point screw

  • One 13.5 mm Tri-point screw

  • Lift the battery out of the upper case.

基板を取り出す前にバッテリーを取り出す必要はありませんが、基板を簡単に安全に取り出しやすくなります。バッテリーを残す場合は、基板をバーコード付近のバッテリーケース側に向けて曲げないようにご注意ください。

上部ケースにバッテリーを固定している次のトライポイントネジを外します。

5.5 mmトライポイントネジー1本

13.5 mmトライポイントネジー1本

上部ケースからバッテリーを取り出します。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.