Ga door naar hoofdinhoud
Step 13
Remove the white plastic protective film from the Hard Drive and save it for your new drive. Remove the (4) 6mm Torx screws that hold the Hard drive to the Drive Carrier with a T10 Torxdriver. there are (2) screws located on each side.
  • Remove the white plastic protective film from the Hard Drive and save it for your new drive.

  • Remove the (4) 6mm Torx screws that hold the Hard drive to the Drive Carrier with a T10 Torxdriver. there are (2) screws located on each side.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.