Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Engels
Nederlands

Stap 5 vertalen

Stap 5
The EMI filter is connected by three screws. Use the T10 screwdriver to remove them. The screw that holds in both the filter and a wire that is connected to it is a different size and should be kept identifiable from the other two screws. The green and yellow wire that was held in by the different screw is tucked behind another component. To get it out, squeeze it behind the black wire and the filter will be able to be removed from the casing.
  • The EMI filter is connected by three screws. Use the T10 screwdriver to remove them.

  • The screw that holds in both the filter and a wire that is connected to it is a different size and should be kept identifiable from the other two screws.

  • The green and yellow wire that was held in by the different screw is tucked behind another component. To get it out, squeeze it behind the black wire and the filter will be able to be removed from the casing.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.