Ga door naar hoofdinhoud
Engels
Nederlands
Stap 5
The webcam is held in with two screws and a connector Unscrew the two screws holding the webcam in place with the TR 10 screwdriver. The webcam is now free from your display!
  • The webcam is held in with two screws and a connector

  • Unscrew the two screws holding the webcam in place with the TR 10 screwdriver.

  • The webcam is now free from your display!

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.