Ga door naar hoofdinhoud

Reemplazo del conjunto de cámara dual de Nintendo DSi

Stap 6
Nintendo DSi Dual Camera Assembly Replacement: stap 0, afbeelding 1 van 2 Nintendo DSi Dual Camera Assembly Replacement: stap 0, afbeelding 2 van 2
  • Push the metal hinge pin inward on the D-pad side of the front lower panel with the tip of a spudger.

  • The pin should move about 3 mm and stop. It is not necessary to try to completely remove the pin.

Empuja el pasador de la bisagra de metal hacia adentro en el lado del D-pad direccional del panel frontal inferior con la punta de un spudger.

El pasador debería moverse unos 3 mm y detenerse. No es necesario intentar quitar el pasador por completo.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.