Ga door naar hoofdinhoud

iPod Mini Display tauschen

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 3
iPod Mini Display Replacement: stap 0, afbeelding 1 van 1
  • Carefully slide the iPod out of its casing by pushing on the logic board near the bottom edge of the click wheel.

  • Do not pull on the headphone jack board at the top of the iPod, as the connector to the logic board is fragile.

Drücke nahe am unteren Rand des ClickWheels vorsichtig auf das Logic Board und schiebe den iPod aus seinem Gehäuse heraus.

Ziehe nicht an der Platine mit der Kopfhörerbuchse oben am iPod, der Stecker am Logic Board ist sehr empfindlich.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.