Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 5
For the next connector, which is right next to the previous wire, there is a piece of tape attached to a metal bar. Flip the metal bar over using the tape as a handle. Next, grab onto the connector and slowly pull it from the socket in the logic board.
  • For the next connector, which is right next to the previous wire, there is a piece of tape attached to a metal bar.

  • Flip the metal bar over using the tape as a handle.

  • Next, grab onto the connector and slowly pull it from the socket in the logic board.

Per il prossimo cavo, che è accanto al precedente, troverai una striscia di nastro nero attaccata ad una staffa in metallo sul connettore.

Ruota la staffa per sbloccare il connettore, usando il nastro come manico.

Quindi tira lentamente il connettore per scollegarlo dalla sua presa sulla scheda.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.