Ga door naar hoofdinhoud

Apple Watchのバッテリーの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 5
Apple Watch Battery Replacement: stap 0, afbeelding 1 van 3 Apple Watch Battery Replacement: stap 0, afbeelding 2 van 3 Apple Watch Battery Replacement: stap 0, afbeelding 3 van 3
  • Once you've opened the gap enough, insert the tip of an opening pick under the glass.

  • Slide the pick along the bottom edge to separate adhesive holding the screen to the case.

  • Be careful not to insert the opening pick too far. Only about 1/8" ( about 3 mm) is necessary, any deeper and you may damage cables.

隙間が十分に開いたら、ガラスの下に開封ピックの先端を滑り込ませます。

開封ピックを下部の端に沿ってスライドしながら、スクリーンとケースを留めている接着剤を剥がしていきます。

奥まで開封ピックを挿し込まないようにご注意ください。約3㎜程度で十分です。これ以上深く押し込むとケーブルにダメージを与えてしまいます。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.