Ga door naar hoofdinhoud
Engels
Nederlands

Stap 3 vertalen

Stap 3
Gently by hand, remove the camera and its ribbon by pulling the camera away from the motherboard. There is adhesive foam on the backside of the camera that may cause some difficulty when removing the camera. There is adhesive foam on the backside of the camera that may cause some difficulty when removing the camera.
  • Gently by hand, remove the camera and its ribbon by pulling the camera away from the motherboard.

  • There is adhesive foam on the backside of the camera that may cause some difficulty when removing the camera.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.