Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
Locate the two lower bumpers on the back cover. These are the rubber feet. Flip the cover over to reveal the inside.
  • Locate the two lower bumpers on the back cover. These are the rubber feet.

  • Flip the cover over to reveal the inside.

  • Locate the two rubber tabs, there are two for each rubber foot. They are located on the inside of the cover.

Localisez les deux pare-chocs inférieurs sur la couverture arrière. Ces deux sont les seuls pieds en caoutchouc.

Retournez la couverture pour révéler l'intérieur.

Localisez les deux languettes en caoutchouc, une pour chaque pied, à l'intérieur du capot arrière.

-[* red] Locate the two lower bumpers on the back cover. These two are the only rubber feet.
+[* red] Locate the two lower bumpers on the back cover. These are the rubber feet.
[* black] Flip the cover over to reveal the inside.
-[* orange] Locate the two rubber tabs, one for each foot, on the inside of the rear cover.
+[* orange] Locate the two rubber tabs, there are two for each rubber foot. They are located on the inside of the cover.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.