Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
With the phone closed, run a plastic opening tool along the seam of the top half of the phone. Make sure to disconnect each of the five clips before proceeding to the next step. There are two clips on each side of the phone and one on the top.
  • With the phone closed, run a plastic opening tool along the seam of the top half of the phone.

  • Make sure to disconnect each of the five clips before proceeding to the next step.

  • There are two clips on each side of the phone and one on the top.

Avec le téléphone fermé, faites passer un outil d'ouverture en plastique le long de la couture de la moitié supérieure du téléphone

Assurez-vous de déconnecter chacun des cinq clips avant de continuer (2 de chaque côté, 1 sur le dessus)

-[* black] With the phone closed, run a plastic opening tool along the seam of the top half of the phone
-[* red] Make sure to disconnect each of the five clips before proceeding (2 on each side, 1 on top)
+[* black] With the phone closed, run a plastic opening tool along the seam of the top half of the phone.
+[* red] Make sure to disconnect each of the five clips before proceeding to the next step.
+[* icon_note] There are two clips on each side of the phone and one on the top.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.