Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
To completely disconnect the battery, locate the two metal tabs connected to the small circuit board.
  • To completely disconnect the battery, locate the two metal tabs connected to the small circuit board.

  • Using a soldering tool, you will desolder the tabs from the circuit board.

  • Please refer to the Hoe moet je (de-)solderen?

  • If your replacement battery already has the small circuit board attached, you can desolder the red and black wires connected to the mother board instead of the metal tabs.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.