Ga door naar hoofdinhoud
Stap 7
Next, a spudger is used to disconnect the Wi-Fi antenna cable. This style of IPEX MHF connector is widely used in the electronics world as an antenna connector. A #1 Phillips screwdriver makes short work of the single screw securing the Wi-Fi card to the lower case.
  • Next, a spudger is used to disconnect the Wi-Fi antenna cable.

  • This style of IPEX MHF connector is widely used in the electronics world as an antenna connector.

  • A #1 Phillips screwdriver makes short work of the single screw securing the Wi-Fi card to the lower case.

  • Finally, the Wi-Fi card can be lifted off the pins connecting it to the main board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.