Ga door naar hoofdinhoud
Engels
Nederlands
Stap 5
Make sure the track is straight by measuring the height of the screw holes. If the front and back screw holes are more than a half inch apart, see guide for drilling new holes. This only works if the height of the drawer doesn't change.
  • Make sure the track is straight by measuring the height of the screw holes. If the front and back screw holes are more than a half inch apart, see guide for drilling new holes.

  • This only works if the height of the drawer doesn't change.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.