Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.
  • Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.

  • Upon removing the Phillips screws that secures the wireless card to the motherboard, the wireless card board should pop up from its top side.

  • Grasp the wireless card and pull it straight out of its socket on the motherboard.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.