Ga door naar hoofdinhoud

Nintendo DSiのマザーボードの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Stap 7 vertalen

Stap 7
Nintendo DSi Motherboard Replacement: stap 0, afbeelding 1 van 3 Nintendo DSi Motherboard Replacement: stap 0, afbeelding 2 van 3 Nintendo DSi Motherboard Replacement: stap 0, afbeelding 3 van 3
  • Slightly lift the motherboard upwards to reveal the upper LCD ribbon cable above the ABXY buttons .

  • Use your fingernail or the edge of a plastic opening tool to carefully flip up the upper LCD ribbon cable retaining flap.

  • Make sure you are flipping up the retaining flap, not the socket itself.

  • Remove the motherboard from the DSi.

マザーボードをわずかに上部に持ち上げ、ABXYボタンの上にある上部LCDリボンケーブルを露出させます。

指の爪やプラスチック製開口ツールの先端を使って、上部LCDリボンケーブルの固定フラップを注意深く跳ね上げます。

ソケットではなく、固定フラップのみを跳ね上げているか確認してください。

DSiからマザーボードを取り外します。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.