Ga door naar hoofdinhoud

Remplacement de la carte mère de la Nintendo DSi

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Stap 2
Nintendo DSi Motherboard Replacement: stap 0, afbeelding 1 van 2 Nintendo DSi Motherboard Replacement: stap 0, afbeelding 2 van 2
  • Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on the following three ZIF sockets:

  • Lower touchscreen cable

  • Lower LCD cable

  • Power board cable

  • Be sure you are prying up on the hinged retaining flaps, not the sockets themselves.

  • After flipping up the locking tabs on all three sockets, use your fingers or a pair of tweezers to gently pull the cables straight out of their sockets.

Avec votre ongle ou un outil en plastique, ouvrez le clapet de retenue des trois prises ZIF suivantes:

La nappe du tactile inférieur

La nappe de l'écran inférieur

La nappe de la carte alimentation

Assurez-vous de faire pression sur les clapets de retenue articulés et non sur les prises elles-mêmes.

Après avoir ouvert les clapets de retenue des trois prises, utilisez vos doigts ou des pincettes pour tirer doucement les nappes hors de leurs prises.

[* black] Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on the following three ZIF sockets:
[* red] Lower touchscreen cable
[* orange] Lower LCD cable
[* yellow] Power board cable
[* icon_caution] Be sure you are prying up on the hinged retaining flaps, ***not*** the sockets themselves.
-[* black] After flipping up the locking tabs on all three sockets, use your fingers or a pair of tweezers to gently pull the cables straight out of their sockets.
+[* black] After flipping up the locking tabs on all three sockets, use your fingers or a pair of [product|IF145-020|tweezers] to gently pull the cables straight out of their sockets.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.