Ga door naar hoofdinhoud

닌텐도 DSi 하단 케이스 어셈블리 교체하기

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Nintendo DSi Lower Case Assembly Replacement: stap 0, afbeelding 1 van 2 Nintendo DSi Lower Case Assembly Replacement: stap 0, afbeelding 2 van 2
  • Two screws are hidden underneath two rubber feet highlighted in red.

  • Use the tip of a spudger to pry the rubber feet out of the lower case.

  • Depending on the age of your device, the rubber feet may crumble apart as you pry them out. If so, use a fine-tipped tool to scrape out any stuck pieces of rubber.

빨간색으로 강조 표시된 두 개의 고무 받침 아래에 나사 두 개가 숨겨져 있습니다.

스퍼저 끝을 사용하여 고무 받침을 하단 케이스에서 들어 올리세요.

[* red] Two screws are hidden underneath two rubber feet highlighted in red.
[* black] Use the tip of a spudger to pry the rubber feet out of the lower case.
+[* icon_note] Depending on the age of your device, the rubber feet may crumble apart as you pry them out. If so, use a fine-tipped tool to scrape out any stuck pieces of rubber.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.