Ga door naar hoofdinhoud

HP 7 1800 Motherboard Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 3
HP 7 1800 Motherboard Replacement, Unscrew the 7 silver screws from the logic board: stap 0, afbeelding 1 van 1
Unscrew the 7 silver screws from the logic board
  • Remove the following 7 screws:

  • Six 4.17mm Phillips #00 around the motherboard.

  • One 2.67mm Phillips #00 next to the front facing camera.

  • The 2.67mm screw circled in yellow is notably shorter than the other 6 screws circled in red.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.