Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Stap 1 vertalen

Stap 1
Grab your Phillips #00 tool and remove the screw located at the top middle of the camera. There is a ribbon wire on the top right. Make sure to disconnect the ribbon wire as you did in the previous step. Slowly and carefully pull the ribbon wire up.
Removing Top Shell
  • Grab your Phillips #00 tool and remove the screw located at the top middle of the camera.

  • There is a ribbon wire on the top right. Make sure to disconnect the ribbon wire as you did in the previous step.

  • Slowly and carefully pull the ribbon wire up.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.