Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
Unscrew (adequately loosen) the six heatsink screws in the order written on the heatsink. Use a Phillips #0 screwdriver. These six screws are built into the heatsink and will not detach from it.
Unscrew Heatsink
  • Unscrew (adequately loosen) the six heatsink screws in the order written on the heatsink. Use a Phillips #0 screwdriver.

  • These six screws are built into the heatsink and will not detach from it.

  • Unplug the fan cable from the motherboard.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.