Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Power down your device. Use your plastic opening tool to wedge between the seams around the sides of the device. Pry open each side, one at a time.  For some a finger nail may be best. The case comes up quite high to the glass.
  • Power down your device.

  • Use your plastic opening tool to wedge between the seams around the sides of the device. Pry open each side, one at a time. For some a finger nail may be best. The case comes up quite high to the glass.

  • Do not pry near the USB port at the base of the device as you may crack the rear panel.

Éteignez votre appareil.

Insérez un outil d'ouverture en plastique dans la jointure sur la tranche de la tablette et parcourez-la en faisant levier de chaque côté, l'un après l'autre.

Ne faites pas levier à côté du port USB, en bas de l'appareil. Vous risqueriez de fissurer la coque arrière.

[* black] Power down your device.
-[* black] Use your plastic opening tool to wedge between the seams around the sides of the device. Pry open each side, one at a time.
+[* black] Use your plastic opening tool to wedge between the seams around the sides of the device. Pry open each side, one at a time. For some a finger nail may be best. The case comes up quite high to the glass.
[* icon_caution] Do not pry near the USB port at the base of the device as you may crack the rear panel.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.