Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Use a Phillips #0 to remove the two  6 mm  screws securing the green circuit board protector. Remove the 6mm Phillips screw attaching the circuit board. Doing so should give you access to the circuit board.
  • Use a Phillips #0 to remove the two 6 mm screws securing the green circuit board protector.

  • Remove the 6mm Phillips screw attaching the circuit board. Doing so should give you access to the circuit board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.