Ga door naar hoofdinhoud
Engels
Nederlands

Stap 5 vertalen

Stap 5
Use a spudger to carefully disconnect the antenna cables from the card by prying them straight up off the board. It's best to use an ESD-safe tool, such as a nylon spudger, rather than the metal spudger shown in the photo.
  • Use a spudger to carefully disconnect the antenna cables from the card by prying them straight up off the board.

  • It's best to use an ESD-safe tool, such as a nylon spudger, rather than the metal spudger shown in the photo.

  • Note the order of colors for the antenna cables indicated on the card.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.