Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
Repeat for the left clip. Again, using a combination of a spudger and plastic opening tool to evenly pull the plastic clip up out of its channel in the heat sink. When there is enough of a gap between the fan and the heat sink, insert the spudger between the two, and pry up to remove the fan. When there is enough of a gap between the fan and the heat sink, insert the spudger between the two, and pry up to remove the fan.
  • Repeat for the left clip. Again, using a combination of a spudger and plastic opening tool to evenly pull the plastic clip up out of its channel in the heat sink.

  • When there is enough of a gap between the fan and the heat sink, insert the spudger between the two, and pry up to remove the fan.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.