Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 4
Insert the flat end of a spudger between the upper and lower case where they meet at the rear of the side vent opening. There is a strong plastic clip connecting the two case halves (the first of many), so you'll need to use quite a bit of force.
  • Insert the flat end of a spudger between the upper and lower case where they meet at the rear of the side vent opening.

  • There is a strong plastic clip connecting the two case halves (the first of many), so you'll need to use quite a bit of force.

  • Leave the spudger in place until you open the case completely. The clips are very springy and may cause the case to snap shut while you're working.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.