Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 3
There is a hidden screw located in the middle of the controller behind the label. Use a screwdriver and punch a hole directly in the center of the label.
Screws
  • There is a hidden screw located in the middle of the controller behind the label.

  • Use a screwdriver and punch a hole directly in the center of the label.

  • You may also lift the label if you do not want to puncture it.

  • Remove the five 10mm screws located on the back of the controller using the T8 Security Torx Screwdriver.

在标签下有一个隐藏的螺丝

用螺丝刀穿透标签,卸下这颗螺丝

如果不想穿透标签的话,你也可以将标签撕下来

使用T8梅花螺丝刀把剩余的五个用于固定手柄后盖的 10 mm 螺丝拆卸下来。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.