Ga door naar hoofdinhoud
Engels
Nederlands
Stap 5
Using pair of channel locks or large pliers, pinch together and pull back the hose clamp securing the hose to the coolant intake. If the factory hose clamps have been replaced, you may need a screwdriver to remove the replacement hose clamps.
  • Using pair of channel locks or large pliers, pinch together and pull back the hose clamp securing the hose to the coolant intake.

  • If the factory hose clamps have been replaced, you may need a screwdriver to remove the replacement hose clamps.

  • There is probably still coolant in the tube so try not to spill it everywhere when removing the hose.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.