Ga door naar hoofdinhoud
Engels
Nederlands
Stap 20
We're getting pretty good at prying up glass, so we've got some idea of where to start. Step 1: Load up on heat. Use plenty of iOpeners. (Or one iOpener plenty of times). Step 2: Pry gently in many places. Opening Picks are the ideal tool.
  • We're getting pretty good at prying up glass, so we've got some idea of where to start.

  • Step 1: Load up on heat. Use plenty of iOpeners. (Or one iOpener plenty of times).

  • Step 2: Pry gently in many places. Opening Picks are the ideal tool.

  • Step 3: ???

  • Step 4: The edges you just heated are nowhere near the adhesive you wanted to loosen. The adhesive is entirely under the LCD panel.

  • Step 4b: Apply plenty of heat to the back and pry slowly.

  • An infinity pool has no visible edge, making the water appear infinite. Using the transitive property, we deduce that an infinity display has... infinite glue?

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.