Skip to main content

Stap 1 vertalen

Step 1
Use an iPod opening tool to peel the edge of the yellow kapton tape that covers the rear-facing camera and the logic board. Continue peeling the tape from the bottom of the rear-facing camera connector.
  • Use an iPod opening tool to peel the edge of the yellow kapton tape that covers the rear-facing camera and the logic board.

  • Continue peeling the tape from the bottom of the rear-facing camera connector.

  • Use a pair of tweezers to grasp and remove the tape from the top of the rear-facing camera connector.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.