Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 8 vertalen

Stap 8
Slightly tilt the steel mid plane to dislodge it from the rear case. Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane.
  • Slightly tilt the steel mid plane to dislodge it from the rear case.

  • Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane.

  • Lift the steel mid plane up off the rear case and peel off the piece of copper tape stuck to the rear-facing camera.

Inclina leggermente la piastra intermedia in acciaio per sganciarla dalla copertura posteriore.

Stai attento a non strappare il pezzo di nastro in rame che collega la fotocamera posteriore alla piastra in acciaio intermedia.

Solleva la piastra dalla copertura posteriore e rimuovi il pezzo di nastro di rame incollato sulla fotocamera posteriore.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.