Ga door naar hoofdinhoud

Sostituzione pannello anteriore iPod Touch 4a generazione

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 5
iPod Touch 4th Generation Front Panel Replacement: stap 0, afbeelding 1 van 1
  • Remove the following eight Phillips #00 screws:

  • One 3.5 mm Phillips screw

  • Two 3.0 mm Phillips screws

  • One 2.3 mm Phillips screw

  • One 2.4 mm Phillips screw

  • Three 2.0 mm Phillips screws

Svita le seguenti otto viti a croce Phillips #00:

Una vite a croce Phillips da 3,5 mm

Due viti a croce Phillips da 3,0 mm

Una vite a croce Phillips da 2,3 mm

Una vite a croce Phillips da 2,4 mm

Tre viti a croce Phillips da 2,0 mm

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.