Ga door naar hoofdinhoud
Engels
Nederlands
Stap 6
Use fingernails or small flathead screw driver to push black tabs on view finder cable connector away from board connector.
  • Use fingernails or small flathead screw driver to push black tabs on view finder cable connector away from board connector.

  • Slide screwdriver beneath length of flex and gently lift upwards to remove flex from connector.

  • Lift flap on lens flex and gently slide flex out.

  • Use finger nails to gently prise small white connector from LCD (bottom right of board) free.

  • Be careful, do not pull it by wires.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.