Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands

Stap 1 vertalen

Stap 1
Before starting disassembly or on completion of reassembly it is highly recommended that you test the lens.
Testing the lens
  • Before starting disassembly or on completion of reassembly it is highly recommended that you test the lens.

  • Gently lift the ribbon cable connections off the two tags on the back of the motor.

  • Apply power to the motor from a 3v battery pack by connecting it to the two tags on the motor. Apply positive to the terminal to the front of the lens to extend it, or to the back of the lens to retract. (Keep all ribbons out of the way - applying power inadvertently to the wrong place could damage something.)

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.