Ga door naar hoofdinhoud
Stap 4
Unfortunately, taking the Virtual Boy apart is not a walk in the park. When we found out that our 1/4" drive gamebit did not fit down into some of the recessed screw holes, we had to get creative.
  • Unfortunately, taking the Virtual Boy apart is not a walk in the park.

  • When we found out that our 1/4" drive gamebit did not fit down into some of the recessed screw holes, we had to get creative.

  • After donning safety glasses and throwing many sparks from our rotary cutoff wheel, we ended up with a nice little gamebit socket that is easy to turn with a flathead screwdriver.

  • With that out of the way, we can finally start taking this thing apart.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.