Ga door naar hoofdinhoud
Engels
Nederlands
Stap 5
The next steps are to disconnect the electrical connections (the wiring harness).
  • The next steps are to disconnect the electrical connections (the wiring harness).

  • Start with the connections at the rear of the machine. The earth wire (yellow/green) is on the left.

  • Use a marker to label the two power wires - it will make it easier to reassemble later. Be sure to pull on the plastic clip rather than the cable.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.