Ga door naar hoofdinhoud
Stap 10
Bluetooth antenna connected to the card on the Backplane board. One needs to be careful because if not connected the Antenna needs to be attached in order not to short-circuit the backpanel board.
  • Bluetooth antenna connected to the card on the Backplane board. One needs to be careful because if not connected the Antenna needs to be attached in order not to short-circuit the backpanel board.

Antena Bluetooth conectada a la tarjeta en el tablero de la placa. Uno debe tener cuidado por que si no esta conectada la antena necesita ser conectada para no causar cortocircuito en el panel del tablero de la placa.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.