Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
While lightly pulling the rear cover away from the logic board assembly, use the flat end of a spudger to release the clips along the top and bottom edges of the rear cover. While lightly pulling the rear cover away from the logic board assembly, use the flat end of a spudger to release the clips along the top and bottom edges of the rear cover.
  • While lightly pulling the rear cover away from the logic board assembly, use the flat end of a spudger to release the clips along the top and bottom edges of the rear cover.

Mentre tiri delicatamente la cover posteriore per staccarla dal gruppo della scheda logica, usa l'estremità piatta di uno spudger per sbloccare le clip lungo i bordi superiore e inferiore della cover posteriore.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.