Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 2
Remove the battery before starting.
  • Remove the battery before starting.

  • Screw management is key to a successful repair. I like using a series of bowls for each side or component of the camera, with scraps of paper to document anything unusual such as an extra long screw.

  • You'll need a small cross head screwdriver, and preferably a magnet stuck to the screwdriver to assist in picking up screws.

  • Optionally a silicon grease and lubricant can be used at the last step.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.