Ga door naar hoofdinhoud
Stap 3
The speaker assembly is now held in the shell just be a number of tabs around the edges. Gently prise it out from these tabs and remove it. Take care not to strain the wires.
  • The speaker assembly is now held in the shell just be a number of tabs around the edges. Gently prise it out from these tabs and remove it.

  • Take care not to strain the wires.

  • On reassembly, make sure the headband fork is correctly positioned otherwise it will be impossible locate the speaker faceplate correctly in the shell.

  • Also on reassembly, make sure the speaker face plate is secured behind all the tabs.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.