Ga door naar hoofdinhoud
Stap 20
With the DMD board removed you will see the three screws again. DO NOT touch these! I just wanted to say that again!
  • With the DMD board removed you will see the three screws again. DO NOT touch these! I just wanted to say that again!

  • With the DMD board removed you can see where the chip mates with the rest of the light engine, in the opening at the center of the cover. It is a good time to use a bit of canned air to blow dust out of this area.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.