Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 7
Next you will remove the power cable that runs to the board next to the DMD board, underneath the fan for the light bulb. Remove the cable end by pressing on the white clip that holds the end in to the plug while pulling up on the cable.
  • Next you will remove the power cable that runs to the board next to the DMD board, underneath the fan for the light bulb.

  • Remove the cable end by pressing on the white clip that holds the end in to the plug while pulling up on the cable.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.